User's Guide

Table Of Contents

SRP9100 RADIO P25 – OPERATING INSTRUCTIONS

1. INTRODUCTION

1.1 OVERVIEW

The Simoco SRP9100 Series Radios are a family of versatile Digital Signal Processor (DSP)

controlled, software-defined two-way portable radios.

These Operating Instructions describe the operation of the APCO P25 Standard compliant

Portable Radio, with suffix P25. There are two versions of the model, one with a keypad

(SRP9130) and one without a keypad (SRP9120).

The SRP9100 P25 Radio may be customised to your operational requirements using the

Field Personality Programmer (FPP). Your Simoco representative can help in programming

your radio facilities to meet your present and future requirements.

1.2 CONFIGURATION

The SRP9100 P25 Radio must be configured using the P25 Field Personality Programmer

(FPP) prior to operation. The configuration process defines the radio channels, signalling and

other settings so that the radio will operate with your system.

1.3 MODES OF SRP9100 P25 OPERATION

The SRP9100 P25 Radio operates in Analogue FM and P25 Conventional and Trunked

Digital modes.

Radio Channels are organised in groups of up to 250 per zone. Up to 64 zones may be

defined.

Generally, zones can be programmed with channels belonging to common function groups.

A radio channel can be defined as either Analogue, Conventional P25 Channel or Trunked

P25 network, and a Zone may contain a mix of Analogue or Conventional P25 Channels.