User Manual

SGD-SB2025NT-TM, Part 2
Jan 12 Page 107 APPENDIX A
Topic Description Options/Notes Type Location (ET page) ET
SNMP
Setup ‘Trap’
destinations (up to 6)
One IP address per
destination
Enter
SNMP (SNMP button,
TM tab)
TM ET
Solar Event
Log
Set System Time Action as required Click
Logging (Logging
button, TM tab)
TM ET
Solar Event
Log
Read Log File Select Type & Date Select
Logging (Logging
button, TM tab)
TM ET
Solar Event
Log
Transfer Log File Start transfer Click
Logging (Logging
button, TM tab)
TM ET
Solar Event
Log
Filter Log File Action as required Select
Logging (Logging
button, TM tab)
TM ET
Solar Event
Log
Save Log File Action if required Click
Logging (Logging
button, TM tab)
TM ET
Solar Timing
GO Traffic O/P Time
(Station NI)
40 ms – 200 ms
(20 ms steps)
Select
Sync Timing (Sync
button, TM tab)
TM ET
Solar Timing
RTN Traffic O/P Time
(Central NI)
40 ms – 200 ms
(20 ms steps)
Select
Sync Timing (Sync
button, TM tab)
TM ET
Solar Timing
GO TM Buffer
(Central NI)
20 ms – 140 ms
(20 ms steps)
Select
Sync Timing (Sync
button, TM tab)
TM ET
Solar Timing
RTN TM Buffer
(Station NI)
20 ms – 140 ms
(20 ms steps)
Select
Sync Timing (Sync
button, TM tab)
TM ET
Test Tone Test tone route External/Network/Off Button
NI Engineering
(Facilities tab)
Both ET
Test Tone Test tone frequency 300 Hz – 2500 Hz Enter
NI Engineering
(Facilities tab)
Both ET
Test Tone Test tone level
0 dB to −10 dB (1 dB
steps & −4.4 dB)
Slider
NI Engineering
(Facilities tab)
Both ET
Timing Source
(NI)
Select 1PPS and
NMEA data source
RS422/TTL: with/
without NMEA data
Select Setup (Misc tab) Either
Timing Source
(TM)
Select 1PPS and
NMEA data source
RS422/TTL: with/
without NMEA data
Select
Sync Timing (Setup
button, TM tab)
Either
TM
Duplication
Duplication mode
Unduplicated
Dupl.(Pri), Dupl.(Sec)
Select
TM Setup (Network
button, TM tab)
TM ET
TM
Duplication
IP address
Set to address of
“other” TM
Enter
TM Setup (Network
button, TM tab)
TM ET
TM Network TM IP address
Set to suit network
addressing scheme
Enter
TM Setup (Network
button, TM tab)
TM ET
TM Network Set subnet mask
Set to suit network
addressing scheme
Enter
TM Setup (Network
button, TM tab)
TM ET
TM Network Default gateway
Set to suit network
addressing scheme
Enter
TM Setup (Network
button, TM tab)
TM ET
TM Setup –
Central NI
IP Address
Set to IP address of
required Central NI
Enter
Network button on
Central panel
TM ET
TM Setup –
Central NI
Enable/Disable each
Central NI
Enable/Disable Check
Network button on
Central panel
TM ET
TM Setup –
Station NI
IP Address
Set to IP address of
required Station NI
Enter
Numbered button on
Station panels
TM ET
TM Setup –
Station NI
Enable/Disable each
Station NI
Enable/Disable Check
Numbered button on
Station panels
TM ET
Voting (Chan)
Facilities
Minimum RSSI
Difference
Select from 1 – 13 Select
Channel Setup (Setup
button, channel tab)
TM ET
Voting (Chan)
Facilities
Site Deselection
Timer
0 min – 30 min (5 min
steps)
Select
Channel Setup (Setup
button, channel tab)
TM ET
Voting (Chan)
Facilities
Voter Override Off/any enabled NI Select
Channel Setup (Setup
button, channel tab)
TM ET