User Manual

SGD-SB2025NT-TUM, Part 1
Jan 12 Page 45 ALIGNMENT & TESTING
Figure 8. NI Engineering – Facilities tab, Test Tone settings.
Figure 9. NI Engineering – Signalling tab, Manual Trigger.
22. On MxTools Channel screen, select channel No 1 and select the ‘Set Software Channel To’
tick button (see Figure 10 overleaf).
23. On the RTS, set it to either Auto Tune or to the Tx frequency.
24. On the PC, on the MxTools Channel screen, double click on channel No.1 to access the
Channel Edit screen.
25. On the Channel Edit screen, carry out the following:
25.1. Select the ‘Continuous Update Enabled’ tick box.
25.2. Set the ‘Ref Osc Level (LF Audio)’ digital potentiometer to 210.