User Manual

SGD-SB2025NT-TUM, Part 2
Jan 12 Page 19 NI ET
2 NETWORK INTERFACE ET
The screen displays for the NI in this section are those that will be seen when directly connected to
the NI using the front panel USB connection. When accessing an NI remotely through the TM, the
view remains largely the same but only a single ‘Eng’ function is available (see Section 3.5 –
Remote View of an NI).
2.1 I NTRODUCTION
The initial main window view of an unconfigured and unconnected NI is shown below in Figure 8.
Figure 8. An Unconfigured NI.
Once a basic configuration has been established and the timing and network connections are
made, the main window view will change according to the role assigned to the NI by the TM. This
is reflected in the left hand column or panel where items and facilities related to use are displayed
(see Figures 9(a) and 9(b) overleaf). All of the sub-facilities buttons along the bottom of the
window lead to the same features regardless of the NI mode of operation.