Operating instructions

SRM9030plus ~ PMR Mobile Radio User Guide
© Comgroup Australia 2010 6 TNM-U-E-0092 Issue 1.1a
The Left/Right Arrow buttons scroll through the entries within the current Menu Screen (e.g.
Channels).
The Up/Down Arrow buttons go to other Menu Screens.
The Green Handset button will send the Channel-Encode selcall (with
Current Phonebook
Entry
and/or
Saved Status Value
) if enabled, refer to Sections 4.2 and 4.3.
The Red Handset button performs a backspace function if a keypad entered number is
present on the Message Line - or if held for more than two seconds then the whole number-
string is cleared.
The Keypad may be used to enter numbers directly, which temporarily appear on the
Message-Line, e.g. Changing channels from the keypad can be done by entering the channel
number and pressing the ‘#’ button.
Note: If DTMF is enabled then pressing keypad buttons will send the corresponding DTMF
tone.
4.2 P HONEBOOK S CREEN
This Screen need only be accessed if Selcall is used. Selcall Identity information is stored for
various users and calls can be placed to them from this Screen.
The Left/Right Arrow buttons scroll through the Phonebook entries.
Pressing the Green Handset button will place a call to the displayed identity.
Alternatively, if the Identity Number is known, the Keypad can be used to enter the number,
which is sent when the Green Handset button or # is pressed.
The Red Handset button will backspace through keypad entered numbers, or it will exit back
to the Main Channel Screen if none.
The Up/Down Arrow buttons go to other Menu Screens.
Notes:
1 If the Selcall requires a Status to be included then the Saved-Status-Value will be
used. (See description of Status Section 4.3)
2 The Identity shown on the display when this Screen is exited may be referenced from
other Menu Screens and is called the Current-Phonebook-Entry.