Users Manual

JH-711 Manual JH-711 Manual

The next time you turn on the SIMOLIO and your phone’s Bluetooth, it should

automatically reconnect to your phone. Alternatively you can tap the

“SIMOLIO" in the Bluetooth list of your phone to reconnect them.

Disconnecting Bluetooth

When the “SIMOLIO” is connected, Press MFB twice in quick succession,

you will hear a prompt tone, the Bluetooth will be disconnected with the red

and blue LEDs flashing alternately. Or you can disconnect the “SIMOLIO” on

your phone. Or just turn off the Bluetooth feature on your phone.

7. Connecting with a Bluetooth enabled TV

STEP 1: Make sure “SIMOLIO” is OFF.

STEP 2: Press and hold the MFB for about 4 seconds until the LED indicator

flashes blue and red alternately.

STEP 3: Take “SIMOLIO” close to your TV and enable your TV's Bluetooth

function from its System Settings Menu then select “SIMOLIO” to connect.

Reconnecting Bluetooth

(2) If there is a phone call while you are listening to music, the phone call will

take precedence over the music, and after the call, it will automatically

return to the previous listening state.

Smart TV

8. Connecting with a Bluetooth enabled iPad/PC/ Laptop

Note: Due to Bluetooth compression

and decompression, a variable audio

signal delay will always exist. You may

find that there is a little bit of out of sync

between the sound and the picture.

This is a common phenomenon and

exists across all Bluetooth devices.

STEP 1: Make sure “SIMOLIO” is OFF.

STEP 2: Press and hold the MFB for about 4

seconds until the LED indicator

flashes blue and red alternately.

STEP 3: Activate Bluetooth on your iPad/

PC/Laptop and connect with “SIMOLIO”.

Note: Your PC/ notebook should support the A2DP profile, if not you may

need a separate Bluetooth dongle that supports this feature.

Fig 3

Fig 4