User's Manual

14 15
• Use the 6.35 to 3.5mm converter to plug a wired headphone/earphone into the
port on AV receiver to check whether the sound is normal.
Step 2. Check the Performance of the AV Receiver's Audio Output as Shown
in Fig 3-22
Pho nes
AV Receiver
6.35mm Audio adapter
(purchase separately)
3.5mm Audio Cable
6.35mm Phone jack
Fig 3-21
Fig 3-22
AV Receiver
6.35mm Audio adapter
(purchase separately)
3.5mm Audio Cable
6.35mm Phone jack
Step 1. Purchase a 6.35mm to 3.5mm Adapter and Set up as Shown in Fig 3-21
SM-824D1 / SM-824D2 is not compatible with ANY RCA(L/R) ports on your AV
Receiver, ONLY use the BIG 6.35mm PHONE OUT on front side of your AV
Receiver with the 6.35mm to 3.5mm adapter (purchase separately).
If you can not hear sound from your headsets after connecting:
Pho nes
94dB 85dB
75dB
volume
L
SM-824D1/SM-824D2 SM-824D1/SM-824D2
BASS
TR
EB
L
E
NORM
A
L
S
TE
R
E
O
TO
NE
AUDIO I
N
MON
O
OFF
DC 5
V
O
F
F/
ON
PO
WER IN
OP
TI
CAL I
N
A
U
D
IO IN
• The two sets of SIMOLIO SM-824D1 / SM-824D2 should be put at least 10
meters away from each other when using them simultaneously.
4. Use Two Sets of SIMOLIO 2.4GHz Wireless TV Headsets
Simultaneously in the Same House
Fig 4-1
room 1 room 2
SM-824D
(Transmitter 2)
SM-824D
(Transmitter 1)
Distance >10M (at least)
•
and make sure the green LED indicators are facing towards each other for about 5
seconds.
Take the headset close to the transmitter, then turn on the transmitter and headset
Note: If two headsets are used on the
same TV, only one transmitter needs to
be connected, because one transmitter
supports multiple headsets to work
simultaneously.
1) Connect the original power adapter with the transmitter
and an electrical outlet, slide the OFF/MONO/STEREO
switch to MONO or STEREO to power on the transmitter.
5. Charge the Headset
2) Slide the ON/OFF switch of the headset to “OFF”. Put
the headset into the charging slot of the transmitter
vertically and carefully and be sure the front of the
headset with the logo of “SIMOLIO” is facing towards
the front of the transmitter with the logo of “SIMOLIO”.
The red charging indicator on the transmitter lights up
and the headset starts charging. If not, please check and
make sure the charging pins are fully inserted.
A: Through the main charging slots on the base
BASS
TREBLE
NORMAL
TONE
AUDIO IN
OPTICAL IN
DC 5V
POWER IN
STEREO
MONO
OFF
OFF/ON
Fig 4-2
Wireless Receiving
Indicator (Green)
( )headset
(Transmitter)
Power &Working
Indicator (Green)
B: Through the battery charging compartment in the base
A spare battery in the battery charging compartment at the side of the transmitter
is always ready. When the headphone battery is low power, pull the spare battery
out of the battery charging compartment for replacement, and the discharged
battery can be put into the compartment for recharging.
Spare Battery
( )included
ON
VOL
BAL
OFF
L
R
L
H
battery
PUSH
Rechargeable & Replaceable
Battery (included)
Fig 5-1
Fig 5-2
Plug in
to
charge