2.4GHz Wireless TV Headphones SM-825D Pro R User Manual Sales & Support Email: support@simolio.com (for NA/AU) support_uk@simolio.com (for UK) Sales & Support Email: support@simolio.com (for NA/AU) support_uk@simolio.
SM-825D Pro SM-825D Pro Thank you for choosing the SIMOLIO SM-825D Pro Wireless TV Headphone. Please read this guide carefully and keep it in a safe place for future reference. If you need any further assistance, please contact our customer support team at: support@simolio.com (NA/AU) support_uk@simolio.com ( UK ) Response Time: 2-24h, excl. Holidays Welcome to subscribe to our YouTube channel - “Simolio Direct” for more product information. Table of Contents Safety Instruction............................
SM-825D Pro SM-825D Pro (3) Long Distance Transmission OVERVIEW Would you like to watch television with crystal-clear sound that won’t disturb others in your family? Do you want to avoid hearing damage that could be caused by wearing normal wireless headphones for a long time? SIMOLIO SM-825D Pro wireless TV hearing assistance and protecting headphone is just made for you. Apply with the latest 2.
SM-825D Pro SM-825D Pro (14) One Transmitter Can Support Multiple Headphones Additional SIMOLIO 2.4GHz wireless headphone receivers can be added to the SM-825D Pro system, allowing multiple listeners to enjoy the same audio source. 4. Ø 3.5mm Audio Cable 5. Micro USB charging Cable 6. Ø3.5mm - RCA ud o Cable Cab e Audio PRODUCT DIAGRAM 1.
SM-825D Pro SM-825D Pro Note: • The transmitter will automatically enter standby mode within 5 minutes of no signal input, and it will automatically restart when there is an audio signal input. • The headphone will power off automatically after 10 minutes of no audio signal in. Using it again, you need to slide ON/OFF switch to “OFF” position, then slide to “ON”. Be aware, the headphone will not automatically power off in the personal sound amplifier mode unless the battery is dead. 2.
SM-825D Pro SM-825D Pro • Ensure your TV speaker is set to “External Speakers”. (Ref. Fig 3-7) 3.1 Digital Optical Connection This part will instruct you on how to connect the SIMOLIO SM-825D Pro transmitter to your television, satellite, or cable box using an optical digital audio cable. • If you cannot get to the back of your TV and you only watch the programs through a fixed TV box (cable/satellite box/DVD etc.), you can also use these instructions to install the system to your TV box.
SM-825D Pro SM-825D Pro AUX/RCA, etc.) or they become disabled once you choose "External Speakers" as your TV's audio output. It depends on TV circuit design. TV REAR AUDIO IN R AUDIO OUT L POWER OUT POWER IN OFF/ON OFF MONO STEREO DC 5V/500mA DC 5V TONE OPTICAL IN AUDIO IN TREBLE NORMAL BASS * Your TV’s analog audio settings may be set to “Variable” or “Fixed”.
SM-825D Pro SM-825D Pro Digital to Analog Converter Step 2. TV Audio Out / TV Speaker Setting (use TV remote control) If you can not hear sound from your headphones after connecting: COAXIAL IN • Ensure your TV speaker is set to “Headset”. (Ref. Fig 3-14) POWER OUT POWER IN OFF/ON R OFF MONO DC 5V/500mA STEREO DC 5V TONE OPTICAL IN TREBLE AUDIO IN NORMAL BASS L RCA OUT • Use the AUX/3.5mm cable to plug the headphone into the headphone/3.
SM-825D Pro SM-825D Pro 2) If your TV/Audio Source’s Digital Optical Audio Out port is occupied by soundbar, you will need an optical splitter for installation. Step 1. Purchase an Optical Splitter and Set up as Shown in Fig 3-21 If you can not hear sound from your headphones after connecting: • Use the AUX cable and 6.35 to 3.5mm converter to plug the headphone into the port on AV receiver to check whether the sound is normal.
SM-825D Pro SM-825D Pro 5.Charge the Headphone A: Through the USB charging port on the rear of the transmitter base You can use the included micro USB charging cable to connect the headphone to the USB charging port on the rear of the transmitter base for charging.(make sure the transmitter base is powered on) (Receiver) (Transmitter) Notes: The charging time is approx. 3 hours. Before using the spare rechargeable battery for the first time, charge it for at least 3 hours.
SM-825D Pro SM-825D Pro 4) Mono/Stereo option: You can switch to STEREO for enjoying Hi-Fi sound quality music or select MONO for enjoying more clear TV dialogues. If, despite a correct balance adjustment, you can hear the sound only with one ear: Set the STEREO/MONO switch on the transmitter to MONO.(Ref.
SM-825D Pro SM-825D Pro Part 3 Phenomena TECHINICAL SPECIFICATIONS Causes Solutions The connection between the transmitter and the audio source is Sound cuts not in place. in and out The audio out function of the or connected audio device is defective some noise (poor signal out). is occurred The headphone is used for listening to streaming media (Netflix, Amazon Prime Video etc). Make sure the connection is firm between the transmitter and the audio source. Connect to another audio out port .
