Unit installation

Digital Half Cylinder
Page 5
3.0 Additional Functions
3.1 OMRON
All product versions can be operated in OMRON mode. You will find a detailed
description in the Smart Relay manual.
3.2 Extending the Coupling Time
The default time for the coupling of the cylinder is approximately 5 seconds. You can
use the software to extend this time to approximately 10 seconds. This shortens the
lifetime of the battery, however.
3.3 Logging Unauthorised Access Attempts
For cylinder version 10.2 and later and in combination with the LDB Version
1.40 and later, it is possible to log unauthorised access attempts, as well as
authorised accesses. This includes both access attempts without authorisation
and
access attempts outside the specified time zone. In this connection, however,
only transponders from the locking system are logged, which means that the
transponder must have the same locking system ID (SID).
3.4 No Acoustic Programmer Acknowledge
When programming over the network, it can be advantageous to deactivate the
acoustic programmer acknowledge. You can do that with this function.