Unit installation

Manual – Digital Half Cylinder 3061
Page 10
The half cylinder does not engage automatically at the appointed time but re-
mains disengaged until a subsequent command is received from the first trans-
ponder. You should select this option if you want the half cylinder to engage
automatically at the appointed time.
5. Transponder active
• Always
Transponders cannot usually be used when the door is freely accessible.
However, you should select this option if you want to be able to lock a freely
accessible door (for instance if everyone has left the building). In other
words, if you want to manually override the time-switch.
• Only when locked
This mode renders transponders unable to operate a freely accessible door
during the general access period.
3.10 Flip-Flop
Deactivates the pulse mode (default setting), the pulse length is no longer relevant.
When in flip-flop mode the half cylinder will change its status from engaged to disen-
gaged or vice versa whenever a transponder is operated. This mode is recommend-
able if, for instance, you want to make a door freely accessible without the use of a
transponder.