Unit installation

Manual – Digital Half Cylinder 3061
Page 12
4.4 Emergency switch activated
Half cylinders installed within a SimonsVoss network can be permanently engaged
automatically via an automated command in the programming software. The signal is
usually transmitted by a fire detection system and can be interpreted by the LDB (if
configured accordingly).
4.5 Time-controlled opening active
This box is checked if the time-switch function has been programmed and the half cyl-
inder engaged automatically by the time switch.
4.6 Engaged
This box is checked if the time-switch function or flip-flop mode has been programmed
and the half cylinder is engaged.