Unit installation

PinCode Keypad 3068
Page 4
1.0. General information
Please take 15 minutes and read through these
Instructions in order to familiarise yourself with
the function of your PinCode Keypad..
1.1 Safety Remarks
Caution! Incorrect handling of the batteries used in this product can result in the risk
of fire or burns. Do not charge, open or burn these batteries or heat them to more
than 100° C (212° F).
Make sure that the PinCode Keypad remains free of dirt and scratches; do not drop
the Keypad or otherwise subject it to heavy impacts.
Furthermore, please note that you should program the Keypad with a PIN code
immediately after you start it up.
Use of a SimonsVoss PinCode Keypad requires knowledge of the use of the product
and of the SimonsVoss software. For this reason, only trained and authorised
personnel should program the PinCode Keypad.
SimonsVoss Technologies AG will not accept any liability for damages caused by
incorrect programming.
If the PinCode Keypad is incorrectly programmed or is defective, access through a
door may be blocked. SimonsVoss AG is not liable for the consequences, such as
blocked access to injured or endangered persons, property damage or other
damages.
The casing of the PinCode keypad is secured with two Torx screws (TX6) for
increased security against unauthorised opening.