Unit installation

PinCode Keypad 3068
Page 6
2.2 Operating modes
The PinCode Keypad has four distinct operating modes:
Mode: Explanation:
Standby The PIN Code Keypad is in standby mode, and uses only very little power.
Opening After a correct PIN has been entered, the locking is addressed via radio
transmission and can be operated.
Programming In this mode, the following can be programmed or reset:
• the individual PINs (max. 3) - directly via the Keypad
• or the associated integrated transponders (max. 3) - using the
SimonsVoss software
Battery warning A two-level battery warning system provides plenty of advance notice when it
is almost time to change the batteries.
2.3 Operating
After starting up and configuring the PinCode Keypad, it and a SimonsVoss locking
represent a so-called "hidden lock" within the System 3060. You can program the PIN
directly by making entries on the Keypad. On the other hand, the integrated
transponders are programmed by means of the SimonsVoss software, and
incorporated into the locking system in this way. The following sections describe the
precise procedure for programming individual PIN codes and for programming the
associated transponder data records, and the use of the PinCode Keypad.