Operating instructions

Manual – LDB 1.5
Page 89
89
10.2 Saving a file
Approve your Lock System. Choose File and Save as....
In Save as:, select the folder in which you would like to save the file. Files are
normally stored in the following folder:
Hard drive C:\Program Files\Simons & Voss\System3060. Under File name, enter the
name you would like to give the file, then click Save.
If you are using a desktop computer to manage your Lock Plan and a laptop
for programming, we strongly recommend that you do not save your Lock Plan
on the laptop’s hard drive. If you do there is a risk that, after programming a
lock, you will forget to upload the updated Lock Plan to your desktop and you
will continue to use the old Plan instead.
Warning:
Always create a backup copy of your Lock Plan, preferably somewhere
other than the hard drive used to store the original.
If you are saving the file for the very first time, you will automatically be asked for a
password. This is the password which you will later use to open the file. The file
password and Lock System password can be identical.
Enter a password and press the Tab key. Confirm the file password and click OK.