Technical data

SMART RELAY SREL, SREL.ZK, SREL.ADV

7.7.10 LOGGING UNAUTHORISED ATTEMPTED ACCESS EVENTS

Only for SREL.ZK und SREL.ADV

Normally, only authorised transponder operations are logged. If you also wish to re-

cord an attempt to open the door with a non-authorised transponder, you need to se-

lect this option.

8.0 Summary of diode signals

8.0 DESCRIPTION OF FUNCTIONS

In order to use a Smart Relay as a card reader in a third-party access control or time-

and-attendance system, the hardware (cabling and signal emitter) and data formats

must match those of the card reader precisely. This is the only way that the third-party

system will be able to understand and evaluate data from SimonsVoss transponders.

First of all, the transponder data are read by the Smart Relay. If the transponder is

authorised for use in the Smart Relay, these data are transmitted to the third-party

system via the serial interface. You will receive detailed specifications for individual

data formats from SimonsVoss Product Management.

The right reader type is selected in the Smart Relay configuration in the SimonsVoss

software, version 1.40 and higher. The connections for the different reader variants

are listed below.