Technical data

SMART RELAY SREL, SREL.ZK, SREL.ADV

11.0 Smart Relay 2

11.1 SMART RELAY 2 VERSIONS

SREL2.G2.W: The SREL2 is basically used with transponders, i.e. as purely "active"

components. There is also the option of using a Compact Reader and operating the

SREL with Mifare Classic/DERFire

cards.

This relay provides a simple yes/no authorisation for a maximum of 64,000 different

transponders.

SREL2.G2.W.WP: As described above, but with a waterproof design.

You must seal the bushing yourself under your own responsibility. It is recommended

to use suitable materials such as silicon or another resistant

sealing material. The

housing features an IP65 design.

SREL2.ZK.G2.W: The same as the basic version, but with the option of separately

connectable access event logging for the last 1,024 accesses with date and time, or

day – time zones for up to 100 user groups and automatic locking and unlocking

(time-controlled switchover). This version can also be used as a gateway in a virtual

network.

SREL2.ZK.G2.W.WP: As described above, but with a waterproof design.

You must seal the bushing yourself under your own responsibility. It is recommended

to use suitable materials such as silicon or another resistant

sealing material. The

housing features an IP65 design.

SREL2.ZK.MH.G2.W: As the ZK version above. Two external card readers

(SC.M.E.G2) and an internal card reader (SC.M.I.G2) can be connected to this ver-

sion. Mifare Classic/DERFire

cards can be used with this particular SREL2.

SREL2.ZK.MH.G2.W.WP: As described above, but with a waterproof design.

You must seal the bushing yourself under your own responsibility. It is recommended

to use suitable materials such as silicon or another resistant

sealing material. The

housing features an IP65 design.