Product manual

PRODUCT MANUAL
TRANSPONDER 3064
7
3 SPECIAL DESIGNS
3.1 Password transponder
Instead of being entered manually, the locking system password can be transmitted
by radio using a special transponder. Standard transponders cannot be used as a
password transponder.
3.2 Switch transponder
For this type of transponder, a two-wire cable (about 1 m) is connected to the switch
contacts on the button and fed to the outside. The transponder interconnects when
the two wires are connected.
Examples of use:
 Linking third-party systems
 Remote activation of a digital locking cylinder or Smart Relay
3.3 Explosion protection transponder (EX protection)
This transponder features the same functions as Transponder 3064, but is also ap-
proved for use in Explosion Protection Zone 1 areas (please refer to Section 3 for fur-
ther information).
3.4 Bonded transponder
Bonded transponder
This is a standard transponder as described above, but with a casing bonded to the
transponder. This prevents the end user from misusing the transponder electronics or
opening the casing.
3.5 Transponder with integrated RFID chip
Transponders can be supplied with different integrated RFID chips as an option.
These RFID Chips do not necessarily need to be programmed using the LSM pro-
gramme. There is no logical connection between the active transponder and the pas-
sive RFID component.
The following different technologies are offered:
 EM® 4102
 HITAG® 1
 HITAG® 2
 MIFARE® Classic
 MIFARE® DESFire
 LEGIC® MIM256
 LEGIC® ADVANT 128