User Manual

WaveNet Radio Network 3065
Page 11
7.4 Lock Nodes
WaveNet Lock Nodes form the interface between WaveNet and the locks in the 3060
digital locking and organization system (locking cylinders and SmartRelays, for
example).
All of them have:
• A special B-field port through which they communicate with the
SimonsVoss RF locks;
• A radio port (915 MHz) for transmitting data to the WaveNet Nodes (WaveNet
Router Nodes, WaveNet Repeater Nodes and WaveNet Central Nodes).
Inside the system, a WaveNet Lock Node can only be allocated to one RF lock
(cylindrical, mortise, SmartRelay or furniture lock, for instance). The distance between
a WaveNet Lock Node and a RF lock may not exceed 18 inches.
WaveNet Lock Nodes are battery-powered and can therefore be integrated into the
SimonsVoss WaveNet with no wiring whatsoever. This makes the system ideal for
installation in an existing building.
For installation, the WaveNet Lock Node will fit into a standard single-gang electrical
box.
Lock Node with casing
Lock Node inputs / output
Every WaveNet Lock Node has one output and three inputs (for door monitoring, for
example).
The three inputs enable up to three external floating contacts to be connected.
This enables the central monitoring of devices such as door and lock contacts as well
as motion sensors, light barriers and so on – via the WaveNet network. The status of
each connected contact can be polled by the host computer at any time, and changes
to the contacts (events) can (if the Lock Node is configured accordingly) also be
automatically registered by the host computer.