User Guide

Wave L1
3.5mm Lavalier Microphone
User Manual
3.Performance Parameter
2.Polar Pattern
Transducer Type
Polar Pattern
Frequency Range
Sensitivity
Signal to Noise Ratio
Output Connection
Length
Electret Condenser
Omni-directional
20Hz-20KHz
-36dB (F=1KHz,S.P.L=1Pa 0dB=1V/Pa)
63dB SPL
3.5mm
2 meters
TRRS-TRS
Adapter
Specifications
1.Frequency Response
-30
-40
-50
-60
-70
-80
20 50 100 200 500 1k 2k 5k 10k 20k
Microphone Frequency Response dB Ref. 1V/Pa
0 Deg
Package includes the following items:
Lavalier Microphone
x 1pc
User Manual
x 1pc
TRRS-TRS Adapter
x 1pc
Foam Windscreen
x 2pcs
Carrying Bag
x 1pc
Item Checking list
Intended Use
Intended use of the simorr Wave L1 includes：
The user has read the instructions of this manual.
The user is using the product within the operating conditions and limitations
described in this user manual.
“Improper use” means using the products other than as described in these
instructions or under operating conditions which differ from those
described herein.
Usage Steps
Microphone Installation
First, plug the microphone into the smart phone with 3.5mm TRRS interface;
Second, start recording through video or audio programme.
Wave L1
3.5mm Lavalier Microphone
User Manual
Guarantee Card
Serial No.
Item Name
Purchase Date
User Name
Mobile
Address
Receipt
Service Warranty
Please keep your original receipt and guarantee card.Be sure the dealer has written on it
the date of purchase and SN of the product.These are required for warranty service.
This warranty does not cover:
1. Defect caused by users' vioation of the"Instructions" and "Usage Steps".
2. The product identification or SN label is removed or defaced in any way.
3. The product is serviced or repaired by any one other than our company or the service
agency authorized by our company.
After-sale warranty terms
1. 7 Days DOA Return Policy: Within 7 Days from the date of the package receipt, return
or replacement can be done if the item received is malfunctioning or physical damaged
(not caused by human abused), return shipping cost will be on simorr’s charge.
2. 30 Days Free-Reason Return Policy: Within 30 Days from the date of the package
receipt, return or replacement can be done if the item is in good condition (without any
malfunctioning or physical damaged ), the return shipping cost will be on
customer’s charge.
3. 1-Year Warranty: Within 1-year from the date of the package receipt, defective product
which is not caused by human abused is eligible to get repair/replacement for free;
defective product which is caused by human abused, repair/replacement will be charged
based on the damage level.
In order to ensure users' safety and prevent damages to the product due to any
improper use, please carefully read the "Instructions" below and properly keep this
User Manual for future reference.
Thank you for purchasing simorr's product.
Foreword
Instructions
Please read this user manual carefully.
Please keep this user manual. Always keep this user manual when passing
the products on to the third party.
Heed all warnings and follow all instructions in this user manual.
Warnings
Do not place the product in a place where there are corrosive chemicals to protect
the product from corrosion. Corrosion may cause the product to malfunction.
Use only a microfiber and dry cloth for cleaning the product.
Operate carefully to not cause any damage by dropping or physical shocking it.
Keep all liquids away from the product. Liquids entering the product short-circuit
the electronics or damage the mechanics.
Keep storing the product in a dry, clean, dust-free environment.
Please have the product checked by the authorized service or agent if your
product has some problems. Please note that this warranty does not apply to
repair arisingout of the malfunction of unauthorized dis-assembly, although
you may requestsuch repairs on a chargeable basis.
The product is certificated by CE, RoHS and FCC. Please operate the product in
compliance with the operation standards. Please note that this warranty does
not apply to repairs on a chargeable basis.
The instructions and information in this manual are based on thorough, controlled
company testing procedures. Further notice will not be given if the design and
specifications change.