User Guide Powerline Adapter AV200
Thank you for choosing the Simple Audio Powerline Adapter AV200 Package contents Powerline Adapter AV200 Ethernet (CAT5) Cable User Guide
Contents Safety instructions Welcome Powerline Adapter basics Set up your Powerline Adapter Product specifications Warranty EC Declaration of Conformity Contact 3 4 5 6 8 10 11 13 14
Safety instructions Please read the following safety information before operating your Powerline Adapter. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use the apparatus near water. • Clean only with a dry cloth. • Do not block any ventilation openings. • Install in accordance with the manufacturer’s instructions. • Do not install the device near any heat sources such as heaters, radiators or other apparatus that produce heat.
Welcome Get ready to set up a Powerline communications network in your home. Your new adapter makes it even easier for you to set up a Powerline network and gives you the freedom to locate your first Roomplayer anywhere you want in your home. It’s really easy to set up. Connect your new Powerline Adapter to your router using the Ethernet (CAT5) cable supplied then pair your adapter with your first Roomplayer.
Powerline Adapter basics Find out where the sockets are, what the buttons do and what the lights mean. Front panel Power/pairing status light This light indicates that the plug is switched on/off and shows the pairing status.
Powerline Adapter basics continued Underside panel Pairing button Use this button to pair your Powerline Adapter with your Roomplayer. Make sure you follow the detailed pairing instructions on page 8. Ethernet socket Reset button To set up your adapter for the first time, plug it in and switch it on, then press and hold this button for 10 seconds (until all the lights on the front panel flash twice). This will prepare the Powerline Adapter for pairing.
Set up your Powerline Adapter Follow these steps in order to set up and pair your Powerline Adapter. Important: Always apply power to your Powerline Adapter before your Roomplayer. If your Roomplayer is switched on, please turn it off at the mains socket before you start. Step 1 Connect your Powerline Adapter to your router i. Connect one end of your Ethernet Cable to your Powerline Adapter. ii. Connect the other end of your Ethernet Cable to your router. iii.
Set up your Powerline Adapter continued iii. Activate your Powerline Adapter Press and hold the pairing button on your Powerline Adapter for approximately 10 seconds. Release the button after the green power light on the front panel flashes twice. Your Powerline Adapter is now ready for pairing. Press pairing button for 10 seconds iv. Pair your Powerline Adapter Press the pairing button on your Powerline Adapter for 2 seconds and release. The green power light will begin to flash.
Product specifications Chipset Atheros AR6400 Computer Interface IEEE802.3 (10BASE-T) IEEE802.3u (100BASE-T) Data PHY Rate Up to 200 Mbps Standards HomePlug AV 200 Network Interface One RJ-45 (10/100Base-T Ethernet) One 200Mbps HomePlug AV Powerline Port supporting co-existence with HomePlug 1.
Warranty Two Year EU Warranty A Two Year Warranty is offered exclusively to the original purchaser of a Simple Audio product and is not transferable whether upon the subsequent sale of a Simple Audio product by you or otherwise. No registration is required. You must however present your original, dated Simple Audio sales receipt or other proof of purchase if warranty is required.
Warranty continued 3. What Simple Audio will do and pay for if you qualify for this cover and how Simple Audio will provide the required service. Simple Audio will pay for all parts and labour covered by this Two Year Warranty. You must pay all shipping charges if it is necessary to return the product to Simple Audio or your retailer. However, if the required repairs etc.
EC Declaration of Conformity Simple Audio Ltd declares under our sole responsibility that the named product is in conformance with 2006/95/EC (Low Voltage Directive) and 2004/108/EC (Electromagnetic Compatibility Directive) as amended.
Contact Simple Audio Limited Tel: +44(0) 141 440 5220 Email: info@simpleaudio.com Web: www.simpleaudio.com Disposal This product needs to be recycled at the end of its life, according to EU guideline RL2002/96/EG WEEE - Directive on Waste Electrical and Electronic Equipment which is valid for all European Countries. When disposal is not possible, ‘Simple Audio Ltd’ can do recycling for you. In this instance, the device must be sent, free of all costs*, to the address noted on our website.
For more assistance visit the Simple Audio website: www.simpleaudio.com/support Version 1.
www.simpleaudio.
