Instructions / Assembly
Simple Green 20 oz. Foaming Coil Cleaner, Aerosol
Instrucons For Use:
1. Turn o or disconnect power to unit being cleaned and wait unl coils are cool before
cleaning.
2. Apply test on a hidden area rst.
3. Shake can. Remove cap and point nozzle toward surface being cleaned. Apply an even
coat of foam on soiled surfaces. Avoid spraying electrical wires or connecons.
4. This product is self-rinsing on condensate-producing coils, simply leave cleaner to dry.
Otherwise, damp wipe or rinse clean with water.
5. When used on equipment that will be returned to a food processing area, product must
rst be rinsed o with potable water.
6. For extremely stubborn soils, repeat steps 3 and 4 as necessary.
7. Once rinsed or dried, restore power to unit.
*NON-CORROSIVE when used as directed on cool surfaces.