Operation Manual

• Place the Doona Car Seat rearward-facing on the vehicle seat (baby

is facing backwards).

Note: Installation of the Doona Car Seat in the front seat of the vehicle

is not recommended, yet possible. Should you decide to install your

Doona Car Seat in the front, move the front seat of the vehicle all the

way back before proceeding to the next steps. Once completing the

installation according to below instructions, take the seat forward.

• Ensure that the handle (#2) is in the upright position B.

• Pull out the vehicle seat belt and place it across the Doona Car Seat.

• Engage the vehicle seat belt buckle tongue (#30) in the vehicle seat

buckle (#31).

• Place the lap belt section of the vehicle seat belt (#29) in the blue

belt guides (#3) on both sides of the Doona Car Seat.

28. diagonal

strap

29. lap belt

30. seat belt

buckle toungue

31. vehicle

seat buckle

USE OF THE DOONA CAR SEAT IN THE VEHICLE