Operation Manual

• Pull out the 3 sunshade back pins (#33) at the head area

of the sunshade.

• Pull out the sunshade plastic spine (#32) from the sunshade

hinges (#34) and remove the fabric from the spine.

Reconnect the spine to the hinges.

• Disconnect the 4 hooks (#35) located at the head area of

the Doona Car Seat fabric cover.

• Pull out the fabric cover to reveal the 2 side plastic pins

(#36) on each side of the Doona Car Seat.

• Pull out the fabric cover from around the blue plastic belt

guides (#3).

• Click out the belt guide pins (#37) that hide under the cover

in the front of the belt guides (#3).

• Click out the lower pin (#38) located at the middle of the

feet area of the Doona Car Seat fabric cover.

• Pull out the fabric cover from around the harness release

button (#12).

• At the back of the Doona Car Seat disconnect the shoulder

straps (#8) from the metal plate (#21).

• Pull the shoulder straps (#8) and the harness buckle (#11)

out of the fabric seat cover completely.

WARNING!

Never remove the buckle tongues (#9) from the

straps.

THE NEXT GENERATION CAR SEAT

7.3. Removing the fabric seat cover and

the sunshade