Instructions / Assembly

- 4 -
INSTALLATION INSTRUCTIONS
4.TEMPLATE AND CUTOUT
No template is provided since each sink will vary dimensionally. After centering the sinktrace
the outline of the sink on the counter-top with a pencil to use as a guide for the cutout.Remem-
ber to allow clearance for any faucets and/or backsplashes. Cut the counter-topaccordingly.
◆
5.FINAL PLACEMENT
Test fit the sink in the opening that was created in the previous steps. The entire weight otthe
sink should be supported by the support frame. Verify that the sink is in line and level with the
top of the cabinet. Use shims, if needed, to level the sink.
Set the sink and apply your sealant to fill in any gaps below the sink front, and between thesink
and counter-top. Hold the sink in place to secure. Place the counter-top onto the sinkand
remove any excess sealant from all surfaces.
◆
◆
[e-mail]