User manual

29
Field
Description
Notches
RF interference reduction is disabled by default.
Power Control
This function minimizes the transmission power of each
PowerGrid unit while maintaining data throughput performance.
*Dynamic
PSD Control
The modem’s Ethernet port monitors the incoming traffic rate
and subsequently calculates the transmission power required that
permits this rate of transmission.
The higher the incoming traffic rate, the greater the phy rate and
transmission power required. The lower the rate, the lesser the
phy rate and transmission power required.
* This feature has been developed to reduce the transmission power so as to
cut the power consumption of the device and minimize the interference to
other electronic devices in the vicinity.
LLTD CONFIGURATION
LLTD (Link Layer Topology Discovery) is a protocol supported by Windows Vista.
LLTD enables applications to discover the topology of a network and includes
optional QoS Extensions that applications can use to diagnose problems.
Field
Description
Link Layer Topology
Discovery (LLTD)
When enabled, multicasting is limited to either IGMP or
MLD Aware Multicast Syndication.
MULTICAST CONFIGURATION
IGMP (Internet Group Membership Protocol) and MLD (Multicast Listener
Discovery) are protocols used by IP hosts to report their multicast group
memberships to any neighboring multicast routers.