User manual

GP-L200MP User Manual
8
The following table describes the LEDs on the device.
LED Color Behavior Description
Green On System runs normally.
Green Blink System enters the power save
mode.
System is resetting.
Password synchronization is in
progress.
Power
- Off PLC adapter is powered off.
Green On Ethernet connection has established.
Green Blink Data is being transmitted.
Ethernet
- Off No Ethernet connection.
Green/Red On The PLC adapter has connected to the
power line network. The Data LED
color will vary according to the
physical rate.
PHY RATE>40Mbps: green
20<PHY RATE<40Mbps:
orange
PHY RATE<20Mbps: red
Red Blink
When the device is scanning other
PLC devices, the Data indicator blinks
quickly.
Data
- Off The PLC adapter does not connect to
the power line network.
Note:
The Power, Ethernet and Data indicators blink quickly when the device is powered on.
At that moment, the Power and Ethernet indicators are green, and the Data indicator
is orange.
When data is being transmitted, the Data indicator keeps on but does not blink.