User manual

GP-L200MP User Manual

The lower panel displays all the HomePlug remote devices, which are discovered in

the current logical network. The total number of remote devices connected in the

same network is displayed above the remote device panel. Network type (Public or

Private) depends on the network status of the local device. Autoscan shows

whether the autoscan function is on. The following information is displayed for all the

devices that appear in the lower panel.

Device Name

This column shows the default device name, which may be modified. To change the

name, click Rename, or click the name and edit it in the list.

MAC Address

This column shows the MAC addresses of the remote devices.

Password

By default, this column is blank. You can click Enter Password to change it. The

steps for setting the password of the device (required when creating a private network)

are as follows:

Step1 Click the device name to select the device in the lower panel.

Step2 Click Enter Password. A dialog box appears, showing the device name

and password. See Figure 7.