User manual

GP-L200MP User Manual
15
Figure 7 Setting the device password
Step3 Click OK to verify the password. The password field accepts the device
password in any case formats, with or without dash.
A confirmation box appears if the password is entered correctly. If a device is not
found, a message appears, providing suggestions to solve the common problems.
This process might take a few seconds to get completed.
Add
This button is used to add a remote device to the existing network by entering the
device password of the device. A dialog box appears. See Figure 8. You can enter a
device name and the password.
If the device is found and the password is entered correctly, a confirmation box
appears. If a device is not found, a message appears, providing suggestions to solve