User manual

GP-L200MP User Manual
1
1 Introduction
The GP-L200MP is a mini-PLC pass-through adapter. It can transmit data up to 200
Mbps in the household power line. It can be connected to the power socket directly
without wiring. The device provides a female socket by which you can connect your
terminal or power stripe directly without an outlet. The GP-L200MP adapter can enter
power save mode triggered by multiple conditions. The GP-L200MP adapter can help
you to establish a high-speed network that supports video, voice and data without
wiring and drilling. It is suitable for using in a wide range of both residential (at home)
and commercial (offices, apartments, hotels, warehouses) network applications.
1.1 Product Features
Without new wiring, every power socket becomes a connection node in
the household.
Plug-and-play to your routers, computers and other network devices.
Integrating a female socket enables additional terminal devices or power
stripe to be connected to the adapter just as a normal wall socket.
Built-in noise filter splitter significantly improves the data transmission.
Provides power saving mode. You are allowed to set different triggering
modes and configure the parameters of power saving mode. In the
power saving mode, the output consumption of the device is less than
1W. Especially, for the device with the upgrade version, the output
consumption can be reduced to below 0.5W.