User manual

200M PLC User Manual 2 Safety Notice
3
2 Safety Notice
This device is intended for connection to the AC power line. For
installation instructions, please refer to the installation section of
this guide. The following precautions should be taken when using
this product.
Read all instructions before installing and operating this
product.
Follow all warnings and instructions marked on the product.
Unplug the device from the wall outlet before cleaning. Use a
damp cloth for cleaning. Do not use liquid cleaners or aerosol
cleaners.
Do not operate this product near water.
This product should never be placed near or over a radiator or
heat register.
Do not use an extension cord between the device and the AC
power source.
Only a qualified technician should service this product.
Opening or removing covers may result in exposure to
dangerous voltage points or other risks.
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
Unplug the device from the wall outlet and refer the product
to qualified service personnel for the following conditions:
– If liquid is spilled into the product