Specifications

Section 4: Telephones and Optional Equipment
4-72 Section 4: Telephones and Optional Equipment Aspire S Hardware Manual
Troubleshooting Procedures
If your phone is not performing to your expectations, please try these simple steps. If you are still unable to
resolve the problem, contact your communications manager.
Problem Suggestion
Charge light won’t
come on when the
handset is placed in
the desktop charger.
Make sure the AC Adaptor is plugged into the desktop charger and
wall outlet.
Make sure the handset is properly seated in the desktop charger.
Make sure the battery pack is properly placed in the handset.
Make sure that the charging contacts on the handset and desktop
charger are clean.
Conversation inter-
rupted frequently.
Make sure that the base unit’s antenna is fully vertical.
Move closer to the base unit.
Warning tone and NO
SERVICE message.
Move closer to the base unit.
Handset doesn’t ring. The battery pack may be weak. Charge the battery for 5-6 hours.
Make sure the base unit antenna is fully vertical.
The handset may be too far away from the base unit.
Ensure the Ringer ON/OFF switch is in the ON position.
Interference from
other cordless phone
users.
Press the Channel (CH) key to switch channels.
The channel can be changed while you are on an active call, but
not when you are dialing a telephone number. There are 10 chan-
nels on the Cordless Lite and 30 channels on the Cordless Lite II
from which you can select.
Interference or noise
in the handset.
Make sure the base unit is at least 3’ away from any computer fax
machine, printer, or TV (they generate radio waves)
Make sure the antenna is in the upright position