Specifications

Section 4: Telephones and Optional Equipment
4-80 ◆ Section 4: Telephones and Optional Equipment Aspire S Hardware Manual
WALL-MOUNT BRACKET
Using the Wall-Mount Bracket
Each Aspire phone has an integrated wall-mounting bracket. This allows the phone to be mounted to a wall
at a convenient location.
Telephones with any optional adapters installed cannot be wall-mounted. The bracket will not accommodate
the adapter(s).
There are two types of mounting brackets - one for the multi-line keysets and one for the 2-button telephone.
Installing the Wall-Mount Handset Bracket (Figure 4-83 - Figure 4-89)
1. Remove the integrated wall bracket from the bottom of the phone. Refer to Figure 4-83.
- From the center cut-out, pull the bracket up and out.
2. Remove the wall-mount hookswitch tab located on the bracket by gently pulling the locking lever
down slightly while lifting the tab out (Figure 4-84).
3. Insert the wall-mount hookswitch tab in the slot below the hookswitch (Figure 4-85).
Figure 4-83: REMOVING THE WALL-MOUNT BRACKET
0893100 - 113