Specifications

Section 5: Data and SMDR
5-2 ◆ Section 5: Data and SMDR Aspire S Hardware Manual
CTA Adapter
The CTA Adapter provides a serial interface (9-pin male RS-232C) connector. This can be used for SMDR or
TAPI (1.4) or system reporting. When using the adapter for printing, the following printers are recommended:
● Citizen CBM CBM1000-RJ100S Thermal Printer
● Star Precision SP2520MD-J1 Impact Dot Printer
When used for SMDR or system reports, the CTA driver does not need to be installed. When used for TAPI,
the CTA driver (available on NEC’s Technical Support web site: ws1.necii.com) is required.
CTU Adapter
The CTU Adapter provides a USB connector. This can be used for either SMDR, TAPI (1.4), or system
reporting. The CTU driver needs to be installed for any use. The CTU driver is available on NEC’s Technical
Support web site: ws1.necii.com.
Data Communication Availability With Hardware
Feature
Hardware
CPU Built-In
Serial Port
ENTU-S
Ethernet Port
CTA Adapter CTU Adapter
PCPro Yes Yes No No
WebPro (for installer) Yes Yes No No
WebPro (for user) No Yes No No
SMDR Output to Printer Yes No Yes Yes
SMDR Output to PC Yes Yes Yes Yes
Hotel/Motel Data Output No No Yes Yes
Traffic Report Yes No Yes Yes
System Information Printout Yes No Yes Yes
Alarm Information Printout Yes No Yes Yes
1st Party CTI (via serial) No No Yes No
1st Party CTI (via USB) No No No Yes
3rd Party CTI No Yes No No