Datasheet

Zeus 2.5-Inch ATA Solid State Drive 13
ELECTRICAL SPECIFICATIONS
Power Requirements
The SSD requires a 5V power source. If a power failure occurs, the drive design ensures that the data
contained in the storage memory is preserved. Data loss or corruption does not occur.
Table 4. Zeus 2.5-Inch SSD Power Requirements
Note: (1) The voltage rail, which includes ripples, does not exceed or fall below the voltage range as
specified by the Min and Max values, i.e., the Min and Max numbers are the absolute floor and ceiling
for the input voltages.
Power Consumption
The amount of power consumed by a Zeus SSD is determined by the storage (memory) capacity of
the drive, and the flash controller/memory configuration of the drive. Table 5 lists the typical power
consumption of the drives per operation.
Table 5. SSD Typical Power Consumption
Item Requirement
Input Voltage
1
5V +/-5% (4.75V Min, 5.25V Max)
Ripple (0-30MHz) 70 mV p-p (for 3.3V)
Supply Rise Time 7 - 100 ms
Supply Fall Time < 5s
Power Consumption
Operation Typical Maximum
Idle 375mA 425mA
Read (40MB/sec) 400mA 560mA
Write (26MB/sec) 400mA 545mA