Datasheet

14 Zeus 2.5-Inch ATA Solid State Drive
Start-Up Time and Current Draw
The Start-Up current was measured during the power-on phase of the computer and drive. The Start-
Up time was ~850ms. Figure 2 shows the current draw during start-up, with an average current of
333.5mA RMS.
Figure 2. Start-Up Current Draw
Activity LED
Zeus SSDs are configured to drive Pin 39 (-DASP; Disk Present/Secondary Active) of the ATA cable
during all command activity and during periods when the drive indicates a busy state. (Example: Off-
line diagnostic activities.)