Datasheet

58 Zeus 2.5-Inch ATA Solid State Drive
CB Certificate and CB Report
STEC Inc. will provide a complete CB Report. These documents will include the current and voltage
ratings, and prove compliance with the currently applicable versions of IEC 60950-1:2001, Safety of
Information Technology Equipment, including all national deviations.
STEC Inc. will also provide the EMC test report indicating compliance with the currently applicable
versions of:
• EN-55022:1998 (Emissions)
• EN-55024:1998 (Immunity)
• FCC 47CFR Part 15 Class B
Declaration of Conformity
The Declaration of Conformity (DoC) will contain the following:
• Product type and model number
• Marks and countries (e.g. CE, FCC, C-Tick)
• The appropriate technical statement(s) required by the respective regulatory agencies
• STEC Inc. name and address
• STEC Inc. signature
• List of all applicable standards to which the drive conforms
Radio Frequency Emissions
The Zeus SSD has passed radiated emissions testing (10 meter chamber) with a minimum margin
of 4dB below the EN55022 radiated emissions limits in all applicable customer platforms, without any
required changes to the system platforms.
Emissions testing in a 3 meter chamber for over 1GHz per the FCC limit for Class B was performed
up to 2GHz. The -4dB margin, relative to the FCC Class B limit, is a customer requirement.
In preparation for the new CISPR 22 standard change that may go into effect in the year 2007, the
customer requires all drives to pass EMI tests up to the higher frequency of either 6GHz or the fifth
harmonic of the highest signal on the drive. This requirement is applicable to all products being
qualified after this version is released.The specification limits are listed in Table 23.
Table 22. EMI Specification Limits
Class B 1 to 3 GHz is 50dB (uV/m) @ 3 m
Class B 3 to 6 GHz is 54dB (uV/m) @ 3 m