Product manual

18 Zeus
IOPS
3.5-Inch Fibre Channel Solid State Drive
STANDARDS AND REFERENCE DOCUMENTS
This section discusses the formal standards that may apply to the SSD, including electrical product
standards. In addition, this section lists reference documents relevant to the FC-AL and FCP-SCSI
protocols used for the SSD.
ELECTROMAGNETIC SUSCEPTIBILITY
The SSD is intended for installation by the user in an appropriate enclosure, i.e., a server or alternate
enclosure. The enclosure must be designed so that the use of the drive does not impair nearby
electronic equipment within the same enclosure and external to the enclosure.
The user is responsible for choosing, designing and testing the enclosure so that it is appropriate as
previously defined, and complies to related regulations, such as Subpart B of Part 15 of FCC Rules
and Regulations, and the Radio Interference Regulations of the Canadian Department of
Communications.
REFERENCE DOCUMENTS
The following list of ANSI Fibre Channel documents relate to the SSD:
The following list of ANSI SCSI documents relate to the SSD:
X3.230-1994 FC Physical and Signaling Interface (FC-PH)
X3.297.1997 FC-PH-2 Fibre Channel Physical and Signaling Interface-2
X3.303.1998 FC-PH-3 Fibre Channel Physical and Signaling Interface-3
X3.272-1996 FC Arbitrated Loop (FC-AL)
X3.269-1996 Fibre Channel Protocol for SCSI (FCP)
INCITS TR-19 Private Loop SCSI Direct Attach (PLDA)
INCITS TR-20 Fabric Loop Attachment (FC-FLA)
SFF-8045 40-pin SCA-2 Connector with Parallel Selection Specification
SFF-8067 40-pin SCA-2 Connector with Bidirectional Enclosure Services Interface
Specification
X3.131-1994 SCSI-2
X3.270-1996 SCSI-3 Architecture Model
INCITS 305-199X SCSI-3 Enclosure Services