Product manual

Zeus

IOPS

3.5-Inch Fibre Channel Solid State Drive 37

Notes:

1 The FMTPINFO and RTO_REQ bits are not supported and the command is rejected if

either of these bits are set.

2 The DCRT, FOV and STPF bits are ignored.

3 IF DPRY is set then all defects apart from the original defects listed by the NAND chip

manufacturer are returned into use.

4 If format data is supplied, it is accepted by ignored. The drive then erases all user data from

the device.

EASSIGN BLOCKS (07h)

This command is supported by the SSD to allow the operation of host systems that may use the

REASSIGN BLOCKS command. However, the command cannot be truly supported because there

is no direct correlation between a host block number and where data is stored on the media. The

command can be issued and the data accepted, but the SSD will only return a “GOOD” status.

Table 15. Reassign Blocks Command

Bit

Byte 7 6 5 4 3 2 1 0

0 Operation Code (07h)

1 Reserved

LONGLBA LONGLIST

Reserved

5 Control