Operator`s manual

5-2

Every system point is part of the ―Select a List of Points‖ list in the main menu. All points can be

displayed sequentially by address order using this list option. To facilitate a search for a particular

point, lists may be selected by point category (monitors, signals, auxiliary, input/output, pseudo

points, etc.). A list of points may be selected, then scrolled through by using the <NEXT> and

<PREVIOUS> keys.

The following lists are available for selection from the ―Select a List of Points‖ option from the

Main Function Menu:

 All Monitor Points

 All Signal Points

 All Auxiliary Relay Points

 All Auxiliary Feedback Points

 All Zones of 24-Point I/O Card

 All Digital Pseudo Points

 All Analogue Pseudo Points

 All List Pseudo Points

 All Points by Address List

 All Network Points.

1. Press the <MENU> key to enter the panel’s menu system.

2. Press the <NEXT> key until the alphanumeric display reads as follows:

3. Press <ENTER>. The display reads as follows:

4. Press the <NEXT> key to scroll through the categories of points until the required category is

shown, then press the <ENTER> key. The first point in the selected category appears. In the

example below, the point shown is the first one in the monitor zone category.

5. Press the <NEXT> key to scroll through the list of points in the category. When the point that

you want to select is displayed, press the <ENTER> key.

Selecting Points from the Menu

Overview

Procedure

Press <NEXT> or <PREVIOUS> to scroll

Select a List of Points?

Press <ENTER> to select a list of points

All Monitor Zones?

MONITOR CARD 1 ZONE NUMBER 1

FIRE MONITOR ZONE NORMAL