Operator`s manual

6-3
Category
Attribute
Description
TrueAlarm
Sensors Only
(smoke, heat,
VESDA or
4-20mA)
Present sensitivity selected
Displays the current sensitivity of the device.
Average value
Displays the average value recorded by the sensor.
Alarm value
Displays the value required to trigger an alarm.
Current value (per cent of
alarm)
Displays the current (real time) value.
Peak value (per cent of
Alarm)
Displays the maximum value reported by the device as a
percentage. Note that this is the maximum value reported
since the last time this counter was cleared.
Display-Only Attributes, Continued
Summary of Display-
Only Attributes,
(continued)
Table 6-1. More Info Display-Only Attributes (continued)