Operator`s manual

9-5
Network systems consist of multiple panels linked via a 4120 network. Each panel includes a
programmer-defined node number, used to identify the panel on the network. The following
section describes how to determine a panel’s node number. The node number is required
when selecting a network point. See ―Selecting Points‖ in Chapter 5 for more information on
doing this.
1. Press the MENU key.
2. Press the <NEXT> and <PREVIOUS> keys until the prompt reads, ―Display Network
Node Identification?‖
3. Press <ENTER>. The display shows the network node information and indicates the
node number of the panel you are at with an asterisk (*).
Displaying Network Node Information
Overview
Procedure