Specifications

6-3
To view the devices and other contents currently in Install Mode:
1. Press the <Menu> key.
2. Use the Next/Previous arrows to step through the menu to the Diagnostic
Functions? option. Press <Enter> to select this.
3. Use the the Next/Previous arrows to step through the menu to the View/Modify
Install Mode List? option. Press <Enter> to select this.
4. The first option is View Install Mode list? Press <Enter> to select.
5. Use the Next/Previous arrows to step through the Install Mode list.
If you are logged at Level 3, you can remove individual devices from the Install Mode
list.
1. Display the Install Mode list as in the previous section.
2. Step through the list to device to be removed.
3. Press the <More Info> key.
4. Step through the list of options with the Next/Previous arrows to find the
Remove from Install Mode? option.
5. Press <Enter> to select this. The action happens immediately.
If the device is still in fault, the system fault count will increase and the Fault indicator
will flash for a new fault.
Just as many missing devices can be added to the Install Mode list quickly, so can many
devices be removed from the list.
1. Press the <Menu> key.
2. Use the Next/Previous arrows to step through the menu to the Diagnostic
Functions? option. Press <Enter> to select this.
3. Use the Next/Previous arrows to step through the menu to the View/Modify
Install Mode List? option. Press <Enter> to select this.
4. Step through to either the Move ALL NORMAL devices from install mode
option or the Move ALL DEVICES from install mode option.
5. Press <Enter> to select.
The panel will take a few seconds to remove them from the Install Mode list.
If there are devices is still in fault, the system fault count will increase and the Fault
indicator will flash for new faults.
Viewing and Removing Devices in Install Mode
Viewing Contents of
Install Mode list
Removing Individual
Devices from Install
Mode
Removing Many
Points from Install
Mode