Installation manual

14 of 72
SIMPLEX Fault Assistance Guide RevA
29 April 2009
1.1.2.8 IDNet Dipswitch Settings
1. Devices are supplied with DIPSWITCH switch ALL ON (set to 0)
2. DIPSWITCHES are labeled 1 to 8
 Switch 1 = MUST BE ON (Baud Rate)
 Switch 2 = 64
 Switch 3 = 32
 Switch 4 = 16
 Switch 5 = 8
 Switch 6 = 4
 Switch 7 = 2
 Switch 8 = 1
3. Turn Switch OFF to add the above number to the address.
Examples:
 Address 5 = Switch 6 & 8 OFF all others ON.
 Address 23 = Switch 4, 6, 7 & 8 OFF others ON.
NOTE - This is reverse of how the addressable devices address’ are set.
[Refer to section 1.1.3.9 – page 23]