Installation manual

15 of 72
SIMPLEX Fault Assistance Guide RevA
29 April 2009
1.1.3 Addressable Device Faults
To confirm a Loop card is in NORMAL status:
 Press the MENU button.
 Scroll through the options until CARD STATUS is reached.
 Press the ENTER button
 Scroll through the cards in the panel. Confirm that each loop card is
NORMAL.
 If CARD MISSING FAILED ABNORMAL then press ENTER and Scroll
through card faults.
 Refer to the relevant section for fault descriptions.
NOTE - It is vital that the Loop card is in
NORMAL status before addressable
device fault finding is started
!