Installation manual

3 of 72
SIMPLEX Fault Assistance Guide RevA
29 April 2009
2.0 4100 Crash Codes – General Information ...............30
2.1 4100 CRASH CODES – GENERAL INFORMATION .....................31
2.2 4100-FAMILY GENERAL CRASH CODES TABLE ......................32
2.3 4100-FAMILY GENERAL CRASH CODES TABLE (CONTINUED)..33
3.0 Identifying Faults on the IMS & Network.................35
3.1 IDENTIFYING FAULTS ON THE IMS – GENERAL INSTRUCTIONS.36
3.1.1 IMS & TrueSite Workstation Graphical Control Centre ...................36
3.2 DISPLAYED FAULT FORMAT ...................................................37
3.2.1 Fault Type.......................................................................................38
3.3 COMMON NETWORK FAULTS..................................................39
3.3.1 Common Trouble Point for Node ....................................................39
3.3.2 Card Trouble for Node ....................................................................39
3.3.3 Network Operating in Degraded Style 7..........................................39
3.3.4 Network Initialization Incomplete.....................................................39
3.3.5 Node Missing/Failed .......................................................................39
3.3.6 System Pseudo Status for Node.....................................................39
3.3.7 Version Mismatch ...........................................................................39
4.0 Identifying F3200 Faults............................................41
4.1 RECALL SYSTEM FAULTS ......................................................42
4.1.1 Function ..........................................................................................42
4.1.2 Operating Sequence.......................................................................42
4.2 LIST OF SYSTEM FAULTS – NON-NETWORKED........................43
4.3 GLOSSARY OF ABBREVIATIONS..............................................47
5.0 Identifying faults on a QE90 .....................................50
5.1 QE90 SERVICE ISOLATION MODE – FAULT DISPLAY...............51
5.2 ECP VERSIONS 2.XX/4.XX/6.XX – SYSTEM FAULT DISPLAY .....52