Installation manual

31 of 72
SIMPLEX Fault Assistance Guide RevA
29 April 2009
2.1 4100 Crash Codes – General Information
The 4100 family associated with the crash codes in this section are listed below;
 4100 Classic
 4100+
 4020
 4100U
Crash codes can be defined by a class designation as listed below;
CLASS E Crash: Indicates a possible defect in system hardware.
CLASS S Crash: Indicates a possible error/bug in executive software. Check the system
revision (via MENU > Software Revision Level) and contact your local Simplex® branch.
CLASS P Crash: Indicates a possible problem in the job software programming. Incompatible
job hardware and software can be corrected by reprogramming of the job information. Contact
your local Simplex® branch.