Installation manual

4 of 72
SIMPLEX Fault Assistance Guide RevA
29 April 2009
5.3 AUDIO LINE FAULT ................................................................53
5.3.1 Speaker Line Fault/Amp Fault.........................................................53
5.3.2 Amplifier LED Configurations..........................................................53
5.3.3 Speaker Tapping Adjustments........................................................54
5.4 STROBE LINE FAULT..............................................................55
5.4.1 Strobe Output Deliberations............................................................55
STROBE RELAY DRIVER MODULE AND STROBE LIGHT CONNECTION...........................................................56
5.4.2 Cable Gauging................................................................................56
TABLE 1: CABLE GAUGES .........................................................................................................................56
5.4.3 Links and DIP Switches ..................................................................57
TABLE 2: LINK SETTINGS AND THEIR CORRESPONDING OUTPUTS ...............................................................57
TABLE 3: DIP SWITCHES 1 – 4 – SELECT CARD ADDRESS .........................................................................57
TABLE 4: DIP SWITCHES 5 – 8 – SELECT MODE FOR POWERED OUTPUTS................................................58
5.4.4 STBM9008 Board Installation .........................................................59
5.5 BGA OR FIP FAULT ..............................................................60
TABLE 5: DIP SWITCH SETTINGS ..............................................................................................................60
5.6 WIP LINE FAULT ...................................................................62
5.7 PA SPEECH, SPARE SPEECH, WIP SPEECH, COMMS AND
SPARE COMMS CABLE FAULTS......................................................63
5.8 ECP FAILURES......................................................................64
5.8.1 MECP and SECP Failure................................................................64
5.8.2 WIP MECP and SECP Failure ........................................................64
5.8.3 Paging Console Failure...................................................................64
5.9 ECM NETWORKED SYSTEM – SYSTEM FAULT DISPLAY ..........65
5.10 ECM NETWORKED SYSTEMS..................................66
5.11 QE90 FAULT REGISTER .........................................67
6.0 National Contact Directory .......................................71
6.1 CONTACT US.........................................................................72