Instruction manual

31
Item Part No. Description
1 52-00215 Film Trap Base Plate
2 52-00217 Tension Strap Shaft, Lower
3 52-00218 Tension Strap Shaft, Upper
4 52-00219 Upper Tension Shaft Spacer
5 52-00220 Tension Spring Shaft
6 52-00221 Dual Aperture Plate
7 52-00222 Tension Strap (2 req’d.)
8 52-00224 Studio Guide, Fixed
9 82-00115 Slider Bracket
10 81-98141 Rack Gear
11 81-10016 Clamp Plate
12 52-00225 Tension Lever
13 52-00226 Tension Indicator
14 52-00227 Aperture Motor Mount
15 52-00228 Motor Cover
16 52-00229 Studio Guide, Movable (2 req’d.)
17 52-00230 Spring Holder, Studio Guides
18 52-00216 Upper Tension Strap Mount (2 req’d.)
19 71-37002 Dowel Pin, 1" x 1/4" Diameter
20 51-10013 Aperture Clamping Spring
21 52-00345 Dual Aperture Plate Slide Rod
22 4040621 Screw, 4-40 x 5/8" Socket Head
23 4040373 Screw, 4-40 x 3/8" Socket Head (8 req’d.)
24 4080253 Screw, 8-32 x 1/4" Button Head (2 req’d.)
25 4060372 Screw, 6-32 x 3/8" Socket Head (4 req’d.)
26 21-51032 Shoulder Screw, .25" x .25" 10-24 Thrd.
27 4040252 Screw, 4-40 x 1/4" Socket Head (2 req’d.)
28 4100500 Screw, 10-32 x 1/2" Socket Head (2 req’d.)
29 408037C Set Screw, 8-32 x 3/8"
30 21-37030 Roll Pin, 3/8" x 1/16" Diameter (4 req’d.)
31 21-48016 Snap Ring, Truarc 5100-25 (2 req’d.)
32 21-58032 Compression Spring (2 req’d.)
33 81-48002 Retaining Ring
34 52-00352 Trap Mounting Screw, Captive
35 51-48017 Retaining Ring (for Item 34)
36 52-00231 Tension Adjusting Knob
37 4252002 Set Screw, 1/4-20 x 2"
38 52-00232 Shoulder Screw, Studio Guide (2 req’d.)
39 4040120 Screw, 4-40 x 1/8" Pan Head (7 req’d.)
40 52-00353 Printed Circuit Board Assembly, Motor/Frame Light
- 52-00357 Wire Harness, Trap PCB to Controller Cabinet
FILM TRAP & APERTURE CHANGER
Parts List