SIMP IHOME I L I F E B Y D E S I GN ARLINGTON / RALEIGH / PATTERSON ENTRYWAY STORAGE BENCH MODEL # 3AXCARLBEN-DB 1/16
SIMP IHOME I L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
MODEL # 3AXCARLBEN-DB PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION AR AL RIGHT SIDE QTY 1 LEFT SIDE QTY 1 C Up Side / Vertical B SEAT QTY 1 D DIVIDER QTY 1 E FRONT QTY 1 F BACKREST QTY 1 G BACK QTY 1 BOTTOM PANEL QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # 3AXCARLBEN-DB HARDWARE DESCRIPTION 1 2 ALLEN KEY BOLT M6 X 40 mm QTY 8 3 ALLEN KEY BOLT M6 X 30 mm QTY 4 4 5 ALLEN KEY QTY 1 6 8 PHILLIPS SCREW M3 X 12 mm QTY 9 9 PHILLIPS SCREW M4 X 25 mm QTY 2 11 ALLEN KEY BOLT M6 X 80 mm QTY 2 SETS WOOD DOWEL 8 X 30 mm QTY 6 LID SUPPORT QTY 1 7 10 ALLEN KEY SCREW M6 x 30 mm QTY 2 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 4 12 PHILLIPS SCREW ROUND HEAD M4 X 20 mm QTY 4 WOOD BOLT CAPS QTY 2 Required Flathead screwdr
COMPONENTS – KEY DIAGRAM MODEL # 3AXCARLBEN-DB Up Side / Vertical B F C G D AR AL Up Side / Vertical E 7/16
ASSEMBLY MODEL # 3AXCARLBEN-DB STEP 1 F 4 3 Hinge e UpSid al /Vertic C 6 Small pre-drilled holes 1. Insert Dowel 6 into Divider C . 2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Align drilled holes on bottom of Back F with Dowel 6 on Divider C . ( Note: please pay close attention to the location of the 2 small guide holes which accommodate the lid support. They need to be on the same side as the hinges ). 4.
ASSEMBLY MODEL # 3AXCARLBEN-DB STEP 2 G G C Up Sid e / Vert ical C Up Side / Vertical F F 1. Attach Bottom Panel G to Divider C & Back F by sliding on the gap between Divider C & the long rail on Back F .
ASSEMBLY MODEL # 3AXCARLBEN-DB STEP 3 NOTE: The screwdriver is not included in the hardware pack. D 8 8 C Up Sid e / Vert ical 6 1. Insert Dowel 6 into Divider C . 2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Align drilled holes on bottom of Front D with Dowel 6 on Divider C . 4. Using 2 Phillips Screws 8 to attach Divider C to the middle bar on Front D .
ASSEMBLY MODEL # 3AXCARLBEN-DB STEP 4 D AL 6 1 6 4 F 6 D 6 1 AR 1 6 F 6 1. Insert 2 Dowels 6 into each Side AL , AR at specified location. 2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Align drilled holes on side bars of Front D & Back F with Dowel 6 on each Side AL , AR . 4. Using 4 Allen Key Bolts 1 (40mm length ) to attach Front D & Back F to each Side AL , AR .
ASSEMBLY MODEL # 3AXCARLBEN-DB STEP 5 NOTE: The screwdriver is not included in the hardware pack. 11 G 1. Use Phillips screwdriver to attach Phillips Screw Round Head 11 into drilled holes on Bottom Panel G .
ASSEMBLY MODEL # 3AXCARLBEN-DB STEP 6 NOTE: The screwdriver is not included in the hardware pack. 7 7 B 1. Attach Seat B to 3 hinges on Back F using Phillips Screws 7 ( using guide holes underneath of Seat ). 2. Use phillips screwdriver to tighten Screws. Do not over-tighten. STEP 7 B C 5 9 1. Attach Lid Support 5 into pre-drilled holes of Seat B and Divider C using Phillips Screws Round Head 9 . 2. Use phillips screwdriver to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # 3AXCARLBEN-DB STEP 8 AR 2 AL 4 E 2 2 1. Attach Backrest E to back of Sides AL , AR using Allen Key Bolt 2 through drilled holes from Backrest E . 2. Use Allen Key 4 to tighten Bolts. Do not over-tighten.
ASSEMBLY MODEL # 3AXCARLBEN-DB STEP 9 10 4 10 E AL AR 1. Attach Backrest E to back of Side AL , AR using Allen Key Bolts 10 into drilled holes on Side AL , AR . 2. Insert Cross Nuts 10 into drilled holes in Backrest E with the slot facing out. Use a flathead Screwdriver to turn it to align with the Bolts 10 . Repeat on the opposite side. 3. Use Allen Key 4 to tighten Bolts. STEP 10 12 12 1. Insert 2 Wood Bolt Caps 12 into exposed bolt holes on side of bench.
SIMP IHOME I L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
