Instructions / Assembly

8/14
ASSEMBLY
STEP 1
1. Align two pre-drilled holes on each Leg B & Leg C with two Dowels on each side of
Leg Lower Connector D .
2. Leg Lower Connector DInsert Cross Nuts 4 into pre-drilled holes in with the slot
facing out. Use a flathead Screwdriver to turn it to align with the Bolts 4 . Repeat on
the opposite side.
3. Use Allen Key 5 to tighten Bolts. Do not over-tighten.
Repeat Step 1-3 for second set of legs.
5
4
4
B
C
D
MODEL # 3AXCSAW-07-BR